Some of the companies that work with us
Seven areas of expertise, one application standard
Not sure which system is right for you?
Send a photo of the floor and the approximate area — our team will assess the right solution free of charge.
Request a free surveyMillimetre-accurate floors with Laser Screed
A first in Türkiye
A laser-guided concrete screed spreads, compacts and levels freshly poured concrete in a single pass, following the grade defined by a laser transmitter set up on site. It reaches a flatness and level accuracy conventional screeding cannot.
Laser-guided grade control
The transmitter on site continuously checks the machine against the target grade, removing operator-driven deviation.
Large areas in one pass
Spreading, compacting and levelling happen in one machine, multiplying the area that can be poured in a day.
Fewer joints
Because the slab can be poured in large panels, the number of joints drops — and with it maintenance cost and failure risk.
High flatness tolerance
Meets the flatness figures required by very narrow aisle (VNA) racking and automated warehouses.
Where we use it
- Logistics warehouses and VNA aisles
- Cold storage
- Production plants
- Aircraft hangars
- Indoor car parks
- Shopping centres
Macro synthetic fibre reinforcement that works within the concrete
Macro synthetic fibre · product texture
We bring Ataklar İnşaat's industrial flooring and field experience together with PolyProFiber macro synthetic fibre products in one project approach.
Macro fibres with a monofilament copolymer and polypropylene structure disperse three-dimensionally through the concrete mix. When assessed against the structural requirements and concrete mix design, they offer a reinforcement option that supports crack control, impact behaviour and long-term durability.
- A fibre structure that supports shrinkage and micro-crack control
- Polymer-based reinforcement that does not corrode
- Three-dimensional distribution through the concrete volume
- A solution suited to industrial floors and ground-bearing slabs
Product type and dosage must be determined from project loads, concrete class and the engineering design.
Explore PolyProFiber productsAfter the pour: surface and curing materials
The life of an industrial floor is not set by the concrete class alone; it is set by what happens to the surface and the curing process in the first hours after the pour. The Maestro products we use on site cover these three critical steps.
The surface hardener strengthens the top of fresh concrete against abrasion, the adhesive additive builds the bond between layers, and the curing compound stops the concrete from losing its water too early. Working together, they make the floor markedly longer-lived at the same concrete class.
- Maestro HardscreedSurface hardener · grey
Applied to the fresh concrete surface by dry shake. It reacts with the concrete's own water to make the top layer denser and more abrasion resistant; preferred in warehouse, factory and car park floors with heavy forklift traffic.
- Maestro Latex-AConcrete, adhesion and mortar additive
Increases adhesion and reduces shrinkage in cement-based mortars and screeds. Used in repair and overlay work where a strong bond between old concrete and the new layer is required.
- Maestro curing compoundConcrete curing compound
Forms a thin film on the fresh concrete surface that slows early evaporation. Applied so the cement can complete hydration and to prevent plastic shrinkage cracking.
Product choice and dosage are determined by the concrete class, the performance expected from the surface and site conditions.
Material and application details- Head office
- İstanbul · İkitelli OSB
- Floor delivered
- 8,000,000 m²+
At your service since 2001
Since 2001 we have delivered industrial flooring with quality materials and modern plant and equipment.
At Ataklar İnşaat we put customer satisfaction first, combining our experience in the construction industry with a specialist team. With the knowledge gathered over the years we are proud to deliver quality, dependable and well-finished projects.
- An experienced, specialist team
- Quality materials and a modern design approach
- Transparent communication and a client-focused approach
Some of the companies that chose us
Healthcare & EducationAnkara Medipol University
- Ümitköy Campus
- Industrial flooring
IndustrialDemirbaş Site
- Construction site
- Field concrete
IndustrialDiller Demirçelik
- Steel plant
- Open-yard concrete
IndustrialGünsev Oto AVM
- Automotive mall
- Car park & yard concrete
IndustrialAlanya Mevle Produce Market
- Wholesale produce market
- Industrial flooring
IndustryEvyap
- Production plant
- Industrial flooring
IndustryŞişecam
- Factory
- Epoxy coating
Logistics & PortsÇelebi Holding — 3rd Airport
- Hangar & apron
- Industrial flooring
Logistics & PortsSafiport
- Port yard
- Joint cutting
Retail & FoodCoca-Cola
- Bottling plant
- Epoxy coating
See our work on video
Footage from our Laser Screed applications and our promotional films.
Get in touch today about the project you have in mind.
Tell us the condition of the floor and the approximate area — our team will get back to you to arrange a survey.
From survey to handover in five steps
The same process runs on a 200 m² warehouse and on a 65,000 m² production plant.
First call
We start with a conversation to understand your requirements and expectations.
Survey & analysis
We inspect the existing slab, load conditions and how the space is used, on site.
Solution & quote
We select the right system for the project and give you a clear, itemised proposal.
Surface preparation
Mechanical preparation brings the substrate to the adhesion profile the system requires.
Application & handover
We apply to a programme that minimises disruption, then hand over after inspection.
Sectors that need industrial flooring
Load, hygiene and safety requirements differ by sector — and so does the system we specify.
- Industrial facilities
- Food industry (meat, dairy, chocolate, canning)
- Textile industry (weaving, dyeing, yarn)
- Pharmaceutical industry
- Power plants (gas, thermal)
- Defence industry
- Automotive industry
- Car parks
- Hangars
- Hospitals
- Shopping centres (stores, food courts)
- Cold storage
Answers before you commit
The questions our team is asked most often on a first site visit.
Our industrial flooring systems are designed for factories, warehouses, production plants and similar industrial spaces. Car parks, hangars, hospitals and shopping centres with heavy footfall are also covered.
The duration depends on the size of the project and the state of the existing floor, but the work is generally completed quickly. On large sites we phase the application so production never stops.
We begin with a conversation to understand your requirements and expectations. We then present a solution tailored to the details of the project. Once agreed, we move into a fast, professional application process.
Epoxy coatings show high resistance to heavy loads, chemicals, impact and other external factors. They are solvent-free and odourless, and adding aggregate produces an anti-slip surface.
Polished concrete is a low-maintenance floor. Beyond regular cleaning it generally needs no protective coatings.
Saw cutting produces less dust and noise than other cutting methods, which makes working indoors or in busy areas considerably easier.