Services
ServicesJoint & Saw Cutting
Expansion and shrinkage joints cut on schedule after the pour, plus precise cutting of concrete, asphalt and stone with low dust and noise.
Joints cut on time, floors without cracks
Fresh concrete cracks as it cures and shrinks; joint cutting gathers that movement onto a planned line. This is why joints must be cut within 48 hours of the pour at the latest. Our joint and saw cutting service delivers precise cuts in concrete, asphalt and stone.
Key advantages
Joints cut on time
Expansion and shrinkage joints are cut within 48 hours of the pour at the latest. A joint cut at the right moment prevents uncontrolled cracking and extends the life of the slab.
Sharp, precise cuts
Diamond blades produce straight, clean cuts; joints, construction breaks and patterned cuts are opened to millimetre accuracy.
Minimal noise and dust
Wet cutting produces far less dust and noise than other methods, which makes working indoors or while production continues possible.
Fast, efficient work
With a professional team and equipment the cutting process moves quickly, keeping disruption to a minimum.
Frequently asked questions
Expansion and shrinkage joints should be cut within 48 hours of the pour at the latest. Cut later, they cannot prevent uncontrolled cracking; cut too early, the edges ravel. We judge the right moment from how the concrete has set.
Concrete, asphalt, stone and other hard materials. On construction projects it is used to open joints, form construction breaks or make patterned cuts.
Wet cutting produces noticeably less dust and noise than other methods, which makes working indoors or while production continues possible.
For more information
- +90 533 740 72 56
- info@ataklarinsaat.com
- İkitelli OSB Mahallesi, Esenler Sanayi Sitesi
3. Blok Apt. No: 2, Başakşehir / 34480 İSTANBUL
From survey to handover in five steps
The same process runs on a 200 m² warehouse and on a 65,000 m² production plant.
First call
We start with a conversation to understand your requirements and expectations.
Survey & analysis
We inspect the existing slab, load conditions and how the space is used, on site.
Solution & quote
We select the right system for the project and give you a clear, itemised proposal.
Surface preparation
Mechanical preparation brings the substrate to the adhesion profile the system requires.
Application & handover
We apply to a programme that minimises disruption, then hand over after inspection.
Our other services
Get in touch today about the project you have in mind.
Tell us the condition of the floor and the approximate area — our team will get back to you to arrange a survey.